TS-1029 T Squared putter
TS-1029 golf putter face
TS-1029 Mallet
TS-1029 Mallet
TS-1029 T Squared putter
TS-1029 golf putter face
TS-1029 Mallet
TS-1029 Mallet

TS-1029 Mallet

$349.00
/
Shipping calculated at checkout.
Finish
Shaft Length
Hand
Grip Style
Please choose
▼
Standard
BLACK STANDARD Most Popular
Standard · 67g · Smooth Rubber
Black Standard
RED STANDARD
Standard · 67g · Smooth Rubber
Red Standard
Pistol Oversize
BLACK PISTOL OVERSIZE
Oversize · 97g · Textured Rubber
Black Pistol Oversize
RED PISTOL OVERSIZE
Oversize · 97g · Textured Rubber
Red Pistol Oversize
Flat Cat
FAT ORIGINAL
Fat / Oversize · 80g · Smooth Rubber
Fat Original
STANDARD ORIGINAL
Standard · 60g · Smooth Rubber
Standard Original
STANDARD TAK
Standard · 92g · Tacky Rubber
Standard Tak
SVELTE TAK
Slim · 75g · Tacky Rubber
Svelte Tak
ORIGINAL SVELTE
Slim · 50g · Smooth Rubber
Original Svelte
STANDARD SOLUTION ⚖
Standard + Weight · 170g · Smooth Rubber
Standard Solution
PISTOL
Std / Pistol · 79g · Smooth Rubber
Pistol
SLIM SVELTE
Slim · 64g · Smooth Rubber
Slim Svelte
Balance
✓
CENTER SHAFT
Face Balanced — straight-back, straight-through stroke
Headcover
T Squared Standard Mallet Headcover
T SQUARED STANDARD MALLET HEADCOVER
Fitted headcover included with every order
Included
  • Free domestic shipping

Engineered for ultimate forgiveness, the TS-1029 is built from a full aerospace grade aluminum body that delivers exceptional stability and feel across the face. This high MOI design inspires confidence on every stroke even when contact is not perfect. At its core is T Squared Up Technology, featuring a CNC milled alignment channel exactly 1.68 inches wide to match the diameter of a golf ball. Paired with our MAG Technology, which uses precision milled alignment lines in the center insert, it creates a visual reference system that frames the ball, promotes a square setup, and reinforces a consistent stroke. The TS-1029’s clean alignment geometry, balanced profile, and wide range of finish options suit a variety of putting styles. Milled to exacting standards and finished in signature T Squared style, it is the modern answer for players who demand confidence, consistency, and performance in every round.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Fit Guide
SHAFT LENGTH BY HEIGHT
At address, your eyes should sit over the ball with your arms hanging naturally — not reaching, not crouching. Use your height as a starting point, then fine-tune based on your posture.
Height
Recommended
Acceptable Range
Notes
Under 5'0"
33"
33" – 33.5"
Shorter = more control
5'0" – 5'3"
33"
33" – 34"
—
5'4" – 5'6"
33.5"
33" – 34"
—
5'7" – 5'9"
34"
33.5" – 34.5"
Most common length
5'10" – 6'0"
34.5"
34" – 35"
—
6'1" – 6'3"
35"
34.5" – 35.5"
—
6'4" – 6'6"
35.5"
35" – 36"
—
6'7"+
36"
35.5" – 36.5"
—
Grip Guide
CHOOSE YOUR GRIP
Every grip ships installed at no extra charge. 12 options across three shape families. Find yours below.
Not sure? Start here —
Round — neutral, no top-side preference
The classic cylindrical shape. No preferred orientation — works equally well with conventional, cross-handed, or claw putting styles. The right starting point if you don't have a strong preference.
Black Standard Grip
BLACK STANDARD Most Popular
Our most popular grip. Neutral round profile — no handedness preference. Works with every putting style from conventional to claw. The reliable, no-gimmick choice.
Standard Size67gSmooth Rubber
Red Standard Grip
RED STANDARD
Identical performance to Black Standard. Red colorway adds a sharp contrast against the Gunmetal Grey head.
Standard Size67gSmooth Rubber
Black Pistol Oversize Grip
BLACK PISTOL OVERSIZE
For players who grip too tightly or have arthritis. The larger diameter naturally relaxes the hands, letting your shoulders — not your wrists — control the stroke.
Oversize97gTextured Rubber
Red Pistol Oversize Grip
RED PISTOL OVERSIZE
Same as Black Pistol Oversize. Red colorway.
Oversize97gTextured Rubber
Fat Original Grip
FAT ORIGINAL
Maximum stability. Widest flat-top profile in the lineup. Heaviest grip option.
Fat / Oversize80gSmooth Rubber
Standard Original Grip
STANDARD ORIGINAL
The entry-point flat-top. Non-tacky, reliable in all weather. Best starting point for players new to flat-top grips.
Standard60gSmooth Rubber
Standard Tak Grip
STANDARD TAK
Standard flat-top with extra-grippy tacky compound. Good for humid conditions or players who prefer more hand feel.
Standard92gTacky Rubber
Svelte Tak Grip
SVELTE TAK
Slim flat-top with tacky compound. Good for humid conditions or players who prefer a narrower diameter with extra grip.
Slim75gTacky Rubber
Original Svelte Grip
ORIGINAL SVELTE
Slim flat-top, non-tacky smooth rubber. For players who want the flat-top wrist benefit with a classic grip feel and diameter.
Slim50gSmooth Rubber
Standard Solution Grip
STANDARD SOLUTION ⚖
Internal counterweight slows the stroke to a natural pendulum tempo. Great for players who rush their putts.
Standard + Weight170gSmooth Rubber
Pistol Grip
PISTOL
Flat Cat's take on a pistol grip — slight thumb ridge without going full oversize. The middle ground between Standard and Pistol Oversize.
Std / Pistol79gSmooth Rubber
Slim Svelte Grip
SLIM SVELTE
The slimmest profile in the Flat Cat lineup. Flat-top wrist stability in the narrowest possible diameter.
Slim64gSmooth Rubber
Specifications
TECH SPECS
Construction
6061 Aircraft Aluminum
Finish
Anodized Type III
Loft
4°
Lie Angle
70°
MOI
High — Square Mallet
Face
Milled — No Insert
Origin
Made in USA
Included
Grip + Headcover
Common Questions
FAQ
The TS-1029 is machined from a single block of 6061 aircraft-grade aluminum in the USA. The square-back geometry produces high MOI — off-center hits stay on-line far better than a blade. The face is milled directly into the head with no insert, giving you direct feedback and a consistent, true roll every time.
Every TS-1029 ships with your chosen grip installed at no extra charge. Choose from any of the 12 options in the grip guide above.
Use the height chart above as a starting point. At address, your eyes should sit over or just inside the ball with your arms hanging naturally. When in doubt, order the length that matches your height — it's correct for most golfers.
Type III hard anodizing is an electrochemical process that converts the surface into an extremely hard, corrosion-resistant oxide layer. It is one of the most durable finishes available — significantly harder than PVD, paint, or powder coat.
4° loft, 70° lie — standard USGA-conforming specs.
Yes — a fitted headcover is included with every TS-1029.

You may also like